User Manual Windows & Macintosh V1.01
9 ○4 — Pen Stand : Use the Pen stand to store the pen between tasks. Changing the battery The power saving mode will be activated if the
10 2. Getting Started -Installation -Configuration
11 Installation Windows Installing the Driver Software on Windows Please fol
12 3. When installing the driver, please follow the installation instructions on screen and press the “Enter” key for each step. After the in
13 Mac OS Installing the Driver Software on Mac OS Please follow the steps below to install the driver : 1. Place Tablet CD into the CD-ROM drive.
14 3. Choose “Driver Setup” when the “Setup Items” dialog box appears. 4. Key-in your name and password (Mac computers require username and passw
15 6. Click “Quit” once the system message showed that “The software was successfully installed”. Hardware Installation Connect the tablet to
16 Configuration Windows To configure your tablet, please press【Start】►【Settings】►【Contr
17 1. Info The Info tab displays the version number of the driver and Tablet PC function. (1) Show Icon in System Tray : Tick the box beside it if y
18 2. Button (1) Button Name You may configure the functions of Pen Tip, Barrel Button 1 and Barrel Button 2 by clicking the drop-down menu for Bu
1 Table of the Contents About This User’s Manual ... 2 Notes for This Manual ... 2 Safety Informat
19 (2) Double Click Time Move the cursor towards “Slow” if you want a slower double-tapping time with the Pen Tip, or move towards “Fast” if you wan
20 3. Scope (1) Full Area Tap on the “Full Area” button to enable the full working area. (2) Screen Ratio Set the tablet screen ratio. The screen
21 (3) Reserve Edges Tap on the “Reserve Edges” button to allocate spaces for the tablet’s hotspots. (4) Pen Area Dimensions This indicates th
22 (5) Pen Area Offset This indicates the horizontal and vertical distances from the upper left corner of the Pen Area to the upper left cor
23 4. Hotspot (1) Hot Pad Layout You can see the properties of the hot keys by clicking the blue blocks at the edges of the digital tablet. (2) Ho
24 Parameters – The string type will be passed to the program as parameters. For example, you may type in a document name here and it will be passed
25 (4) Print Tap on the “Print” button to print an overview of all hot spot functions. (5) Clear Tapping on this button will clear up the definition
26 5. Pressure (1) Pressure Test You can click the slide bar below to adjust pressure sensitivity and there are 4 color choices for the
27 Mac OS Go to Tablet Setting Page 1.1 Click【GO】►【Applications】 1.2 Click Pen Tablet Setting
28 1.3 Click Tablet Setting
2 About This User’s Manual You are reading the Kanvus Office 54 Graphic Tablet User Manual. This Manual provides information regarding t
29 There are 5 tabs : Info, Button, Scope, Hot Cells, Pressure. 1. Info The Info tab displays the version number of the driver and Tablet Mac informa
30 2. Button (1) Button Name You may configure the commands of the pen tip and the two barrel buttons by selecting the button name from the drop do
31 3. Scope (1) Full Area Tap on the “Full Area” button to enable full working area. (2) Screen Ratio Set the screen ratio for the tablet wor
32 (3) Reserve Edges Tap on the “Reserve Edges” button to allocate spaces for the tablet’s hotspots. (4) Pen Area Dimensions This indicates
33 4. Hot Cells (1) Hot Pad Layout You can see the property of a hot key by clicking the blue cells surrounding the digital tablet. (2) Hot Edges
34 (a) Define Hot Cells – Run Run – You may use the browse button to select a file and run it, or you may type in a file name with the complet
35 (c) Define Hot Cells – Hot Key Configure the key combination – You may select any key such as alphabet, numeric key or cursor control key to be c
36 5. Pressure (1) Pressure Test There are four different colors for selecting and the pressure sensitivity of the pen tablet can be adjusted in th
37 (3) Click Sensitivity By default setting, tapping with the pen tip is equivalent to a left click of a mouse. Move the slider in the sensitivity b
38 3. Using the Tablet -Holding the Pen -Working Area -Positioning -Clicking -Dragging -Pressure Control
3 Safety Information Adhering to the following safety information will prolong the life of the Tablet. 1. DO NOT try to open the housing of the tab
39 Holding the Pen Hold the digital pen as you would hold a pencil. Keep the buttons of the
40 Working Area Working area is the area of the tablet that can sense the movemen
41 Positioning Use the digital pen to position the cursor on your PC screen
42 Clicking One Click : Tapping the pen tip once on the tablet surfac
43 Dragging To drag an object, simply point to and click on the object (
44 Pressure Control The tablet comes with drawing applications that support pressure sensit
45 4. Using the Bundled Software -System Requirements -Introduction to Tablet Software -Supporting Operating Systems -Installing Tablet Softwa
46 System Requirements Operating System Windows 2000, XP, Vista or 7 CPU Pentium III or above Hard Disk
47 Introduction to Tablet Software K-WorkInk Allows you to handwrite, make notes or put annotations on Microsoft Word docu
48 Supporting Operating Systems Operating System Windows 2000 Windows XP Windows XP 64 Windows Vista Windows 7 K-Noti
4 1. Product Introduction -Package Contents -Tablet -Digital Pen
49 Installing Tablet Software 1. Open your computer and start the Windows. 2. Place the CD disc into the
50 When you run the installation with Windows Vista/7, after you finish step 4, please wait until you see the message box (see
51 Uninstalling Tablet Software In order to uninstall the Tablet Software, move your cursor to the lower left corner of
52 5. Specification Summary -Tablet -Digital Pen
53 Tablet Active area 5.5" X 4" Dimension (L X W X H)
54 Digital Pen Dimension 137.7 X 12 / 16.4 mm Weight 9g (Except battery)
55 6. Troubleshooting -Testing your device -FAQ -Service and Technical Support -Driver Download
56 Testing your device Please do the following tests first to identify your problem. 1. Check
57 means the hardware is OK. If it does not work, try replacing the battery. (c) After changing the pen’s battery, if it is still not working, this m
58 FAQ Question : Why is the LED of the tablet blinking conti
5 Package Contents Check your package for the following items. Kanvus Office 54 Digital
59 Question : Why can‘t I select K-WordInk or K-Command to install during installation ? Answer : Because both K-WordInk and K-Command are for Window
60 Service and Technical Support If your tablet does not work properly, please check the Troubleshooting procedure an
61 Driver Download You can download the latest driver and e-documents from the following
62 A p p e n d i x -Declarations and Safety Statements -Ordering Components and Accessories -Copyright Information -Limitation of Liability
63 Declarations and Safety Statements FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the
64 Ordering Components and Accessories To purchase parts and accessories, please contact your local dealer or distributor.
65 Copyright Information No part of this manual, including the products and software contained in it,
66 Limitation of Liability Circumstances may arise where because of a default on Kanvus part or othe
6 Tablet Refer to the picture below. Descriptions ○1 — USB Connector
7 (b) When the pen tablet is re-activated, the LED light will go on for a moment, and will then turn off again. (c) When the tablet detects the digit
8 Digital Pen Refer to the pictures below. Descriptions ○1 — Button 2
Comments to this Manuals